The T600 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
The T600 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
The T600 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
Its specifically designed to wash a whole range of containers such as plastic trays, meat lugs, sheet pans, bakery trays, lidded type boxes and even buckets.
The T600 Is supplied with a re-circulated chemical wash and a freshwater rinse, however it can be also supplied with a re-circulated hot rinse at 185F.
The item to wash is simply loaded on the infeed of the tunnel and gently pushed into the machine where a stainless-steel chain type conveyor with lugs picks up the tray and conveys it through the wash tunnel.
The machine can be heated by either electrical immersion heaters, steam or natural gas within the re-circulated wash tank, the chosen chemical can be automatically dosed by means of a chemical dosing system controlled by a conductivity probe installed within the wash tank.
Filtration is achieved by a set of double removable filter type drawers or alternatively our automatic rotary design filter can be fitted as an option.
The wash water is pumped at pressure by a stainless-steel head pump to a set of dedicated wash manifolds installed 360° around the soiled tray, Conductive level probes maintain the water level inside the tank by automatically filling the machine as needed.
The T600 is supplied as standard with a freshwater rinse which is also coupled with a dosing system to add a sanitizer additive chemical, the freshwater rinse is supplied at mains temperature, but can also be supplied with an electrical booster heater or steam mixing valve so to boost the temperature.
Our range of industrial washing machines are designed with numerous safety features as standard, such as electrical interlocked doors, emergency stop push buttons monitored by a safety relay mounted in the main control panel.
As with all our machines the T600 conveyorized washer is built using all the hygienic principles applied to all our equipment, thus eliminating potential bacteria and pathogen breeding traps.
As with all our equipment we can customize our equipment to your specific individual needs, all our machines can be integrated with a range of options to wash different type of containers or tanks.
480v 60Hz 3 phase 4 wire 75 amps/phase FLC.
24 V DC control circuit.
1 x 1” NPT Inlet
1 x ¾” NPT Inlet
30 – 45 psi inlet pressure (Hot preferred, if available).
30 – 45 psi inlet pressure @ Ambient for freshwater rinse.
2 X 2” Outlet
Gravity only.
1 x 10” Diameter outlet
Nominally 650CFM @ 1” wg.
480v 60Hz 3 phase 4 wire 75 amps/phase FLC.
24 V DC control circuit.
1 x 1” NPT Inlet
1 x ¾” NPT Inlet
30 – 45 psi inlet pressure (Hot preferred, if available).
30 – 45 psi inlet pressure @ Ambient for freshwater rinse.
1 x 1” NPT inlet
1 x ¾” NPT Outlet
45-70 PSI inlet pressure.
1 x 225 lbs per hour for the wash plate coil heat exchanger.
1 x 145 lbs per hour for the hot rinse direct injector.
1 X 2” Outlet
Gravity only.
1 x 10” Diameter outlet
Nominally 650CFM @ 1” wg.
480v 60Hz 3 phase 4 wire 14 amps/phase FLC.
24 V DC control circuit.
1 x 1” NPT Inlet
1 x ¾” NPT Inlet
30 – 45 psi inlet pressure (Hot preferred, if available).
30 – 45 psi inlet pressure @ Ambient for freshwater rinse.
1 x ¾” NPT inlet
7-14” wc inlet pressure.
120kw maximum (820,000BTU/hour)
2 x 2” RJT Outlet
Gravity only
1 x 10” diameter outlet
Nominally 650CFM @ 1” wg