The HC/C is a compact hygiene station designed for obligatory use and is positioned prior to entering a production or food preparation area from the changing or break rooms.
The machine is supplied with a dedicated entrance and exit lane which ensures that employees and visitors correctly sanitize their hands and footwear prior to entering the production areas.
A dedicated exit lane allows employees or visitors to exit the production area and avoid congestion.
The operator steps up on to the entrance lane on the machine where a sensor detects their presence and illuminates the light in the hand sanitation chamber, the simultaneous insertion of both hands into the chamber activates a pump which sprays the chosen sanitizer chemical on to the operator's hands.
While the operator is sanitizing their hands, they are also standing within a foot sanitation basin which is full of sanitation solution and sanitizes the bottoms of their footwear.
As soon as the hand sanitation cycle is completed the turnstile will unlock and allow the person to pass through into the production area, as they are passing through the entrance lane a drip zone catches any excess solution from the footwear and channels it back to the basin.
Upon leaving the production area the operator steps up on the dedicated exit lane of the machine where a sensor detects their presence, the sole brushes are initiated and the turnstile unlocks allowing that person to pass over the brushes and clean the soles of there footwear before going back in to the changing room.
Both the entrance and exit lanes have turnstiles which only operate one way ensuring that people cannot pass through the incorrect lanes and not following the procedure.
Our range of hygiene stations are designed with safety in mind, an emergency stop push button is mounted on the machines column to cut the machines operation within an emergency.
The steps on each are non-slip stainless steel, handrails are on either the left or right side of the machine for the operator to steady themselves on while walking over the sole washer machine.
As with all our equipment, our range of Hygiene stations are built using hygienic principles in mind.
The construction of the machine is manufactured from 304 grade stainless steel, surfaces are radiused, so water drains easily form the frame.
The chemical is stored within the compartment of the machine.
CM Process Solutions does not specify chemicals for our range of boot washers, sole washers or hygiene stations, nor unlike some of our competitors does our warranty obligate you to buy chemicals from us in order to receive spare parts or support.
We understand that each application is unique, and we fully believe that there is no one who understands your needs better than you, the customer and your current chemical supplier.
480v 60 HZ 3 phase 4 wire supply
24 v AC control circuit.
1 x ¾” NPT Inlet
43 - 65 psi inlet pressure (Warm if available)
1 x 2”
Outlet Gravity only.