Industrial Boot Wash Stations
CM Process Solutions offers a diverse line of boot cleaning stations from fully automatic to semi automatic and stationary options. These machines wash both the soles and sides of employees’ rubber boots and are designed to be used at entrance and exit for areas where employees’ footwear need to be cleaned.
CM Process Solutions offers a diverse line of boot cleaning stations from fully automatic to semi automatic and stationary options. These machines wash both the soles and sides of employees’ rubber boots and are designed to be used at entrance and exit for areas where employees’ footwear need to be cleaned.
Operational Design
SRV 300 - Stationary Semi-Automatic Boot Cleaner
The SRV 300 is a semi-automatic boot washer with a stainless steel button mounted within the handrail on the machine. Designed for use in small plants; the operator simply places their boot between the two vertically mounted brushes and then places their thumb on the button which initiates the rotation of the three brushes. One of the brushes is mounted horizontally for cleaning the soles of the boot, the other two are vertically mounted which scrub the sides of the boot.
Water and the chosen sanitizer chemical are sprayed onto the brushes from the spray bar mounted close to the brushes. The chemical can be simply adjusted by a needle valve mounted on the incoming side of the water supply pipework. Each brush is individually controlled by its own motor.
DRV 300 - Walk-through Two Way Semi-Automatic Boot Cleaner
The DRV 300 is a semi-automatic boot washer with a stainless steel button mounted within the handrail on the machine. The operator simply steps on to the unit and places their thumb on the button which initiates the rotation of the five brushes. Two of the brushes are mounted horizontally for cleaning the soles of the boot. The other three brushes are vertically mounted, which facilitate the cleaning of the sides of the boot. This design ensures thorough cleaning and that dirt, debris, and stains are effectively removed.Ideal for small to medium sized plants, the DRV 300 is designed as an obligatory entrance and exit area cleaning system.
Water and the chosen sanitizer chemical are sprayed onto the brushes from the spray bar mounted close to the brushes. The chemical can be simply adjusted by a needle valve mounted on the incoming side of the water supply pipework.
The machine has a storage compartment mounted on the side where chemicals can be stored close to the machine. Each brush is individually controlled by its own motor.
DRV 500 - Continuous Passage Two Way Automatic Boot Cleaner
The DRV 500 is a fully automatic boot washer with sensors mounted at each end of the machine within the handrail. The operator simply steps on to the unit and the sensor initiates the rotation of the 6 brushes. Two of the brushes are mounted horizontally for cleaning the soles of the boot and the other four are vertically inclined, which facilitate the cleaning of the sides of the boot. This design is our premium boot sanitizing solution that will remove dirt and debris, ensuring optimal disinfection.
Water and the chosen sanitizer chemical are sprayed onto the brushes from the spray bar mounted close to the brushes. The chemical can be simply adjusted by a needle valve mounted on the incoming side of the water supply pipework. The machine has a lockable storage compartment where cleaning chemicals can be stored within the machine. Each brush is individually controlled by its own motor.
Ideal placement for this heavy duty machine would be at the entrance and/or after exit of the production area of your facility, making it an obligatory process in employee hygiene routines. Each boot brush helps to ensure a thorough cleaning of the operator's footwear to keep your facility clean.
Safety Features
Our range of boot and sole washers are designed with safety in mind. An emergency stop push button is mounted within the handrail to cut the machine's operation in an emergency situation. A reset push-button is installed to ensure that the machine is safe to start operation.
The steps on each are non-slip stainless steel, handrails are positioned on each side of the machine for the operator to steady themselves on while walking over the sole washer machine.
Sanitary Design
Perfect for the pharmaceutical and food industry, all our equipment is built with hygienic principles in mind. These brushes can be easily removed without the use of tools by simply lifting the stainless steel cover and sliding it off the motor cam.
The construction of the machine is manufactured from 304 grade stainless steel and surfaces are radiused, so water drains easily form the frame.
Manual Design
Certain facilities would benefit from a manual boot washing station as opposed to our automatic models. These manual boot washers come in a single, double, and triple station design and are outfitted with a stationary base brush and hand held brush for the operator to scrub their boots clean.
View our range of manual options to learn more.
Demonstration Center
Seeing is believing! Our newly commissioned demonstration center is the ideal environment to test equipment for your process requirement and put the equipment through its paces. Our team are on hand to welcome customers visiting this unique test center.
Partnered associations & memberships
CM Process Solutions is proud to be an associate member of some of the nation’s leading trade organizations for food processing. Through their network and stewardship programs, they provide knowledge based support for business, educational initiatives and charities.
