• No products in the list

Single Capacity Smoke Truck Washer

Model No: R20

The R20 is a cabinet batch type washing system designed to provide an exceptional wash and efficient wash performance in cleaning smoke trucks or other styles of cooking racks.

304 Stainless Steel
Chemical Auto Dosing
Heating Options
High Flow SS Pumps
HMI Controlled
Screen Filtration

Single Capacity Smoke Truck Washer

Model No: R20

The R20 is a cabinet batch type washing system designed to provide an exceptional wash and efficient wash performance in cleaning smoke trucks or other styles of cooking racks.

304 Stainless Steel
Chemical Auto Dosing
Heating Options
High Flow SS Pumps
HMI Controlled
Screen Filtration

The R20 is a cabinet batch type washing system designed to provide an exceptional wash and efficient wash performance in cleaning smoke trucks or other styles of cooking racks.

The R20 can be supplied with two loading options either a pit mounted design or a with a stainless-steel loading ramp allowing easy access of the soiled racks.

Operational Design

The smoke trucks are simply loaded inside the washer where they sit on heavy duty removable type grids, once loaded the operator can close the stainless-steel door and initiate the various wash programs.

Wash Cycle

The R20 has a dedicated hot water re-circulated wash tank which can be heated by either electrical immersion type heaters, alternatively it can also be heated by steam with either plate coils or steam injectors.

The temperature is controlled by the HMI on the control panel which also gives indication of the machine status, faults, or any other operational information relevant to the machine.

Two powerful high flow stainless steel wash pumps deliver water to our innovative travel jet system which is positioned 360° around the soiled rack, the wash carriage then oscillates forwards and backwards within the inside of the wash chamber with hot water and chemical that is recirculated from the wash tank.

The chosen chemical is automatically dosed into the wash tank by a chemical doser, where a conductivity probe measures the concentration inside the wash tank.

Filtration can be achieved by simple vertical mounted filters which are easily removable.

Rinse Cycle

Various types of rinse features are available from an ambient temperature rinse coupled with a sanitizer chemical, an inline electrical booster heater, or a steam mixing valve.

Alternatively, should it be required a dedicated hot rinse at 185°F can be employed to give a heated sanitizing rinse.

Safety Features

The R20 is designed with numerous safety features in mind such as emergency stop pushbuttons, electrical interlocked doors, an internal pull chord system is fitted which protects the operator from the machine starting in the event of them being locked within the wash chamber.

Sanitary Design

As with all our machines the R20 smoke truck washer is built using all the hygienic principles applied to all our equipment, thus eliminating potential bacteria and pathogen breeding traps.

Customized Solutions

The R20 Rack washer along with all of our equipment can be customized to your specific individual needs, all of our machines can be integrated with a range of options such as magnetic door locks or upgraded filtration and rinse cycles.

304 Stainless Steel
Chemical Auto Dosing
Heating Options
High Flow SS Pumps
HMI Controlled
Screen Filtration
Adjustable Times
Water Saving
SS Fan
Re Circulated Hot Wash

Features

MACHINE SERVICE DETAILS ELECTRICAL HEATED MACHINE:

ELECTRIC:

480v 60Hz 4 wire supply.
24 Volt DC control circuit.
63 amps/ phase FLC.
80-amp Isolator.

WATER

1 x 1” NPT inlet

30-45 psi inlet pressure @ ambient

DRAIN

1 x 2” RJT outlet

Gravity only

EXTRACTION

1 x 10” diameter outlet

Nominally 650 CFM @ 1” wg

MACHINE SERVICE DETAILS STEAM HEATED MACHINE:

ELECTRIC:

480v 60Hz 4 wire supply.
24 Volt DC control circuit.
16 amps/ phase FLC.
25-amp Isolator.

WATER

1 x 1” NPT inlet

30-45 psi inlet pressure @ ambient

INDIRECT STEAM

2 x 1” NPT inlet
2 x ¾” outlet

45-70 psi inlet pressure.
225-lbs/hour maximum.
Estimated running consumption is 550-lbs/hour.

DRAIN

1 x 2” RJT outlet

Gravity only

EXTRACTION

1 x 10” diameter outlet

Nominally 650 CFM @ 1” wg

Download Resource

Custom Quote

Our team of sales engineers stand ready to assist you, however, for a faster turnaround, please provide details on your requirements adn we will provide a detailed accurate proposal based on your specific needs.
Market leaders in North America for the innovation of stainless steel hygienic equipment. We supply changing room equipment, hygiene stations, production essentials, material handling lifters and dumpers, processing equipment and industrial washing systems. Our customers are predominantly within the food processing and hygiene-conscious industries.
Keep up to date with the latest in material handling solutions!

101 Tierney Way
Winchester, KY 40391

951-808-4376

sales@cmpsol.com

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram