The T400 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
The T400 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
The T400 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
Its specifically designed to wash a whole range of containers such as plastic trays, meat lugs, sheet pans, bakery trays. Lidded type boxes and even buckets.
The T400 Is supplied with a re-circulated chemical wash and a freshwater rinse, however it can be also supplied with a re-circulated hot rinse at 185F.
The tray is loaded on to the infeed of the tunnel and gently pushed into the machine where a stainless-steel chain type conveyor with lugs picks up the tray and conveys it through the wash tunnel.
Hot water either heated by electrical immersion type heaters or alternatively steam, can be utilized to maintain the wash water temperature within the re-circulated wash tank, the chosen chemical can be automatically dosed by means of a chemical dosing system with a conductivity probe installed in the wash tank.
Filtration is achieved by a set of double removable filter type drawers.
The wash water is simply pumped at pressure by a stainless steel head pump to a set of dedicated wash manifolds, installed 360° around the soiled tray, Conductive level probes maintain the water level inside the tank by automatically filling the machine as needed.
The T400 is supplied as standard with a fresh water rinse which is also coupled with a dosing system to add a sanitizer additive chemical, the fresh water rinse is supplied at mains temperature, but can also be supplied with an electrical booster heater or steam mixing valve, alternatively the machine can be supplied with a rec-circulated hot water rinse at 185° click here to learn more about the TT400.
Our range of industrial washing machines are designed with numerous safety features as standard, such as electrical interlocked doors, emergency stop push buttons monitored by a safety relay mounted in the main control panel.
As with all our machines the T400 Conveyorized washer is built using all the hygienic principles applied to all our equipment thus eliminating potential bacteria and pathogen breeding traps
As with all our equipment we can customize our equipment to your specific individual needs, all of our machines can be integrated with a range of options to wash different type of containers or tanks.
480v 60Hz 3 phase 4 wire 56.5 amps/phase FLC.
24 V DC control circuit.
1 x 1” NPT Inlet
1 x ¾” NPT Inlet
30 – 45 psi inlet pressure (Hot preferred, if available).
30 – 45 psi inlet pressure @ Ambient for sanitizer tank.
2 X 2” Outlet
Gravity only.
1 x 10” Diameter outlet
Nominally 650CFM @ 1” wg.
480v 60Hz 3 phase 4 wire 10 amps/phase FLC.
24 V DC control circuit.
1 x 1” NPT Inlet
1 x ¾” NPT Inlet
30 – 45 psi inlet pressure (Hot preferred, if available).
30 – 45 psi inlet pressure @ Ambient for sanitizer tank.
1 x 1” NPT inlet
1 x ¾” NPT Outlet
45-70 PSI inlet pressure.
1 x 225 lbs per hour for the wash plate coil heat exchanger.
1 x 145 lbs per hour for the hot rinse direct injector.
1 X 2” Outlet
Gravity only.
1 x 10” Diameter outlet
Nominally 650CFM @ 1” wg.