The TT400 is a single lane continuous type washer which is ideally suited for small to medium size operations, or where operational space is minimal.
It's designed to wash a whole range of containers such as plastic trays, meat lugs, sheet pans, bakery trays. lidded type boxes and even buckets.
The TT400 Is supplied with a re-circulated chemical wash, a recirculated hot water rinse at 185°F, a fresh water sanitizing chemical rinse, and ends with a single stage bulk water removal section, its specifically designed for high care applications where further temperature and chemical sanitizing processes are required.
Operational Design
The soiled tray is loaded on to the infeed of the wash tunnel and gently pushed into the machine where a stainless steel chain type conveyor with lugs picks up the tray and conveys it through the wash tunnel.
The trays are conveyed through two dedicated re-circulated tanks one is a heated wash tank complete with an automatic chemical dosing system which works from a conductivity probe.
The second tank is a re-circulated high temperature hot water rinse designed to give a heated sanitizer rinse.
Water is pumped from both tanks by stainless steel head pumps to a set of dedicated wash and rinse manifolds positioned 360° around the soiled tray, food grade curtains in the wash tunnel separate both zones preventing splash over from each tank, conductive level probes are fitted in both tanks where the water level is maintained and automatically filled where needed.
Filtration is achieved by a set of double removable filter type drawers installed in each tank.
A fresh water final rinse with a sanitizer chemical additive doser is also installed which gives a chemical rinse should this be required, if needed this can be isolated.
Heating
Various types of heating are available on the TT400 washing machine, from electric immersion type heaters, to direct and indirect steam coils or injectors.
Bulk Water Removal Section
The TT400+1SB is supplied with a single stage bulk water removal section for removing excess water from the totes, a 10hp blower fan is mounted on the top of the machine canopy within a stainless steel enclosure, where ambient air is drawn in and delivered through stainless steel piping to stainless steel air knives positioned around the tray for best removal of bulk water.
Access to the blower chamber is by an electrical interlocked side access panel.
For increased drying additional blower modules can be fitted as an optional extra.
Safety Features
Our range of industrial washing machines are designed with numerous safety features in mind, and risk assessments are thoroughly conducted on each product we offer and supply.
All the stainless steel access covers have electromagnetic door switches which when opened cuts the pump and stops the machines operation until it has been reset.
Emergency stop push buttons are fitted on the infeed and outfeed and are monitored by an emergency stop pushbutton mounted in the main control panel.
Sanitary Design
As with all our machines the TT400 Tray washer is built using all the hygienic principles applied to all our equipment thus eliminating potential bacteria and pathogen breeding traps.
Customized Solutions
As with all our equipment we can customize our equipment to your specific individual needs, all of our machines can be integrated with a range of options to wash different types of containers or tanks.
